|
| AQ-2000 Features
AQ-2000 Spec's |
More
Photos |
|
Aqua Phase Model AQ-2000 is the next step up from the
AQ-1000. Designed for the rugged use requirements found in medium size to large size long
term care facilities, home medical and durable medical equipment dealers. With the
AQ-2000, your operator can select from a 3, 5, or 7 minute wash cycle length thus allowing
the most efficient use of time. AQ-2000 includes a wheel rotation system for wheelchairs,
so little or no pre-treating of tires is required.
Wash chamber construction of the AQ-2000 is single wall polished
Stainless Steel. To enhance the longevity of the AQ-2000, the water/spray distribution
system is made of 1" Stainless Steel and includes solid brass spray nozzles.
Like all Aqua Phase models, in order to operate the machines
once the unit is located, all you need to do is hook up two hoses, one for the hot water
fill and one for the drain, plug the Aqua Phase in and begin saving time, improving
efficiency and enhancing infection control.
|
|
| Standard Features - AQ-2000: |
 | Stainless Steel Construction and Spray Arms |
 | Single-Wall Stainless Steel Chamber |
 | Variable Wash Time Cycles (3, 5, or 7 minute) |
 | Rinse Cycle System |
 | Rotation of Wheelchair Wheels (Front & Rear) |
 | Heavy Duty Casters |
 | Hot Water Hose Set (Set of 2 - 10') |
|
|
| Options - AQ-2000: |
 | Front Door Safety Glass Window |
 | Disinfectant Application System |
 | Equipment Loading Wash Rack |
 | Utility Wash Trays |
 | Electronic Temperature Monitor |
 | Air Dry Blower |
 | Utility Chamber Floor |
 | Multi-Size Wheel Rotator |
 | Special Time Cycles |
 | 220 Volt 50/60 Hz Operation |
 | Long Hot Water Hose Set (Set of 2 - 25') |
|
|
|
|
Design Features - AQ-2000:
(Go to AQ-2000 Spec.'s)
|
|
| Construction (Stainless Steel) |
Single Wall |
| System Controls Are By |
Logic Controller |
| Spray Arm Assemblies |
Stainless Steel |
| Tested to European Specs. |
No |
| UL Listed Electronics Assembly |
Standard |
| Rinse Cycle |
Standard |
| Cleaner Injection System |
Peristaltic |
| Wash Cycle Lengths |
3,5, or 7 minutes |
| Disinfectant Application (Optional) |
Automatic |
| Filter Clogging Signal |
Standard |
| Water Level Sensor |
Electronic |
| GFCI Breaker in Power Cord |
Standard |
| Safety Switch Front & Rear |
Standard |
| Maximum AMP Draw |
16.5 |
| Warranty - Wash Chamber |
5 years |
| Warranty - Parts |
1 year |
| Warranty - Labor |
90-day |
|
|
|
|
| Dimensions - AQ-2000: |
|
| Machine Outside Width |
33-5/8" |
| Machine Outside Length |
64" |
| Machine Outside Height |
62" |
| Wash Chamber Width |
28-1/2" |
| Wash Chamber Length |
52-1/4" |
| Wash Chamber Height |
44" |
|
|
|
|
Currently, the AQ-2000 Model Series is only available in
North
America.
|
|
|
Product Changes and Options Availability
Following publication, certain changes in standard equipment, options, prices and the like, or product delays, may have occurred which would not be included in these pages. Your Aqua Phase Dealer is your best source for up-to-date information. Aqua Phase reserves the right to change product specifications at any time without incurring obligations. Options shown or described are available at extra cost and may be offered only in combination with other options or subject to additional ordering requirements or limitations.
|
|

For Limited-Time Promotions on the
most popular washer packages from Aqua Phase,
Call 800-208-9274
|
|
Contact Aqua
Phase for your Area Representative or for a detailed
Proposal for Your Facility
with the options you need, including detailed pricing and discounts.
|
|